| Customization: | Available |
|---|---|
| Signal Transmission: | Cable Connect |
| System: | Passage System |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Wireless Buckle Sensor Seat Belt Transmitter works with Wireless Alarm - Safe and Sound to Use
Model: PA-37 / 44WP-H Wireless Buckle Press Seat Belt Transmitter
Giftshine cordless fall monitor has a wireless receiver for signals from cordless bed sensor pad, chair sensor pad, floor sensor mat, and other wireless transmitters. Advanced technology allows this buckle sensor seat belt to work with no cord and delivers wireless signal to receiver monitor.
No Cord Between Pad and Monitor
Reduce tripping hazards and eliminate broken or scrambled cord around chair. Suitable for hospitals and nursing homes.
Features:
1) Can be used on wheelchair.
2) Can help to prevent fall accidents and ensure personal safety.
3) Works with wireless alarm receiver / monitor.
4) It is suitable for residents / elderly with low agility.
5) The wireless alarm receiver / monitor sounds immediately when buckle switch is released from the belt, alerting caregiver to a potential fall.
Seat Belt Installation:
1) Place seat belt on the wheelchair.
2) Fix the belt ends to the wheelchair frame.
How to Use:
1) Open the seat belt by pressing the buckle.
2) Put it around the patient's waist, then plug in the buckle again.
3) Turn on the transmitter power switch, and the seat belt transmitter is ready to work as the standby mode.
4) Press the buckle and the transmitter will deliver wireless signal to the alarm receiver / monitor.
){kind=link}